Step 1: Add 250mL water to the bucket (to mix 1 kg of powder grout) then slowly add contents of the White For Life Activator. Now slowly add one bag of powder to the water while mixing. Add no more than an extra 30mL of water slowly while mixing to obtain a thick consistency. Allow to stand for approx. 3 minutes, then remix grout before tiling.
Step2: Grout small areas at a time by working the grout into the joints and smooth off, using a rubber squeegee or grout float.
Step 3: Allow grout to firm up in joints (10-15 minutes).
Step 4: Using a damp (not wet) sponge, clean tile surfaces by wiping lightly, in a circular motion. Finish with a single wipe diagonally across the tiles.
Step 5: After 24 hours, buff and polish the tile surface with a soft clean cloth.
Step 6: After the grout has set for an initial 24 hours, leave for another 3 days before exposing to water in a shower.