Step 1: Using the pencil, mark out where you want the accessory to go
Step 2: Make sure the surfaces are clean and dust free, give them a quick wipe with a clean cloth
Step 3: Pull cap off Selleys Hold Up tube, unscrew nozzle and pierce membrane with the tip of the nozzle. Replace nozzle and cut along the second ridge
Step 4: Cover the surface of the accessory to be installed with HOLD UP in vertical strips.
HINT: Its crucial that the accessory has a nice, flat back to sit flush against the wall
Step 5: After applying the adhesive, press surfaces together firmly, ensuring the adhesive spreads
TIP: Selleys Hold Up is adjustable for 15 mins so you can get whatever your sticking nice and straight.
Step 6: Clean any excess up with mineral turpentine and leave for 48 hours to fully cure.