Bathroom accessories (toilet roll holder, towel rack, towel ring) – ensure accessories have a flush back (not inset)
Spirit level
Easy as...
Make sure the surfaces are clean, free from grease, grit and grime.
Cut the Selleys Hold Up nozzle at the second line on a 45 angle.
Apply Selleys Hold Up to the bathroom accessory you wish to install.
Press the accessory firmly against the wall in place.
If installing a towel rail (or similar accessory) use a spirit level to ensure your placement is level – if not, simply adjust (Selleys Hold Up is adjustable for up to 15 minutes).
Immediately clean any excess adhesive with white spirits before product cures.
Wait at least 48 hours until product is fully cured before adding weight (longer cure times will be needed in cold or dry conditions or where both surfaces are non-porous)
Selleys Liquid Nails Fast Grab is a high strength construction adhesive that provides strong initial holding power. The water-based formulation is low odour and allows for easy clean up.
Selleys Liquid Nails Extreme Grab is a high performance construction adhesive that delivers an instant hold up to 400kg per m2 on any building material, even vertical surfaces*.
Getting a proper seal around your sink prevents water penetration. Here’s the best way to ensure a complete seal around your sink area to make it easier to clean and less prone to water damage and discolouration. And all without the need for a caulking
Kitchen and bathroom renovations can be costly, not to mention time consuming – but an outdated kitchen or bathroom can also be an absolute eye sore and hindrance if you are looking to sell!
Best ways to remove to silicone. Follow our step by step process. Selleys will show you the easiest and most effective way to remove silicone sealant from tiles, metal, glass, and all those tricky places around the home.
Share
Share this article with your friends