Selleys Knead It Multipurpose

Selleys Knead It Multipurpose is a versatile, hand kneadable fast setting epoxy putty that is ideal for repairing, rebuilding, reshaping or restoring almost anything. It can be drilled, filed, machined, screwed, sawn, sanded, stained and painted.

Features

Will not sag, run or drip.
Easy to use - no mess.
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing.
Good adhesive strength.
Can be used to reshape, rebuild and repair a multitude of surfaces and applications.
Good gap filling properties.
Long-lasting, durable solution.
Heat resistant to 120°C continuously or 140°C intermittently.
Can be used under water (but dry surfaces for application are best and recommended).
Rapid set time (<10 minutes)
Suitable for contact with drinking water. Complies with AS/NZS 4020
Excellent anchoring properties

Product Details
How to Use
Handy tips
Clean Up
Videos

Where can this product be used?

Repair and replacement - timber, metal, masonry, many plastics*, ceramics
Mending - toys, appliances, lawn mowers, sports equipment etc
Sealing - leaks in gutters and downpipes
Patching - chipped concrete, floors, bricks, blocks etc
Attaching - fixtures, machine tags, signs etc
Anchoring - bolts, screws, housings etc
Moulding - to reform-reshape damaged timber, metal, masonry, plastics, ceramics
Moulding to rebuild - wrought iron fencing
Forming knobs and missing parts
Balancing - table legs etc
Fixing a damaged roof tile
Repairing a water (drinking) tank
Lost the head off your hammer? Make a new one with Knead It.
Replace chip in golf club (woods)
Approval for Drinking Water Contact to AS/'NZ4020:2005, however limited to maximum surface area:volume ratio of 100 mm2/L atmaximum temperature of 85°C.

What materials is this product suitable for?

Wood/Timber
Concrete
Anchoring bolts
Metal
Masonry
Most plastics*
Ceramics
*Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size	50g Tube
	110g Tube
Colours	Grey
Technology	Epoxy
Use	Interior
	Exterior

Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 5-10 minutes Knead It Multi Purpose will harden and begin to form a strong bond. After 60 minutes Knead It Multi Purpose may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water before product hardens.

Limitations:

Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible
*Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber

Ensure the putty and hardener are mixed properly. Knead It will become warm as it is mixed. A good indication its mixed properly is when you have a uniform colour, and feel a mild heat radiating from the Knead It.
To help determine when your knead it has set, keep a small piece off to check when it is hard, it indicates your job is done.
Set time increases at temperatures below 20°C.
Use Knead It Aqua for applications in wet/ submerged areas.
Use Knead It Steel for applications on metal or fuel contact.

Remove excess and hand rub with water or a damp cloth
before hardening begins.

Related Products

Selleys Knead It Aqua

Selleys Knead It Aqua is a versatile hand kneadable, fast setting co-extruded epoxy repair system that can be used for repairing a multitude of things. It is especially suitable for application to damp, wet or underwater substrates.

Selleys Knead It Steel

Selleys Knead It Steel is a versatile hand kneadable, fast setting, non-rusting co-extruded epoxy repair system that can be used for metal items.

Selleys Autofix Knead It

Selleys Auto Fix Knead-It is a fast setting, co-extruded epoxy that can be used to repair or rebuild anything around the car, caravan or boat. Once kneaded together, it can be moulded to shape.