Polyglaze Sparkling Wash
Polyglaze Sparkling Wash is a gentle wash specially formulated to give you a sparkling clean and shiny finish, with no streaks or water spotting.
Selleys Auto Fix Knead-It is a fast setting, co-extruded epoxy that can be used to repair or rebuild anything around the car, caravan or boat. Once kneaded together, it can be moulded to shape.
Features
- Will not sag, run or drip
- Easy to use - no mess
- Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing
- Good adhesive strength
- Can be used to reshape, rebuild and repair a multitude of surfaces and applications
- Good gap filling properties
- Long-lasting, durable solution
- Heat resistant to 120°C continuously or 140°C intermittently
- Rapid Set (<10 minutes)
Where can this product be used?
- Metal petrol tank repairs
- Radiator and oil pan repairs
- Leaking gaskets repair
- Filling in scratches, small dents, gouges and holes in panels
- Bonding of trim
- Filling rust holes
- Thread locking
- Anchoring bolts and screws
- Repairing other metal and plastic parts and
pipes
What materials is this product suitable for?
- Metals
- Wood
- China
- Some rigid plastics*
- *Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber
Please contact your store to confirm avaliability, as some stores may have a limited range.
| Size |
110g Tube |
| Colour |
Grey |
| Technology |
Epoxy |
| Use |
Interior |
|
Exterior |
- Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
- Wear protective gloves. Cut off required amount. Replace disc on remaining portion. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
- Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
- For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
- Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
- After 5-10 minutes Selleys Auto Fix Knead-It will harden and begin to form a strong bond. After 60 minutes it may be drilled, sanded, machined, filed, sawed or painted.
- Wash hands thoroughly with soap and water before product hardens.
Limitations:
- Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible
- *Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber
- Ensure the putty and hardener are mixed properly. Knead-It will become warm as it is mixed. A good indication its mixed properly is when you have a uniform colour, and feel a mild heat radiating from the Knead-It.
- To help determine when your knead it has set, keep a small piece off to check- when it is hard, it indicates your job is done.
- Set time increases at temperatures below 20°C.
- A few drops of water can help make kneading the putty easier.
- Use Knead-It Aqua for applications in wet/ submerged areas.
- Use Knead-It Steel for applications on metal or fuel contact.
- Residue may be removed with acetone.
- Cured product can be softened with heat to make scraping easier.
Polyglaze Wash & Wax
Polyglaze Wash & Wax gives a spotlessly streak free finish with a noticeable shine in one easy step for a great result you can be proud of.
How to Guides
How To Create A Chopping Board
Keep on trend and learn how to create a stunning chopping board for serving which will be the envy of your friends at your next dinner party.
How To Fix A Splashback To A Wall
Sticking a splash back in a kitchen is a great way to improve the aesthetics of the kitchen. Selleys make the job easier with this step by step guide.
How To Makeover Your Kitchen In An Afternoon
The kitchen is the heart of every family home, but over time – cooking spills, kids, clutter can leave it looking a little tired. Here are some simple steps to giving it a refresh
How To Seal A Kitchen Splashback
Sealing your splashback is the final step to installing a splashback and perhaps the most important! It's super easy to do with Selleys silicone sealant.
Share
Share this product with your friends