Selleys Knead It Steel

Selleys Knead It Steel is a versatile hand kneadable, fast setting, non-rusting co-extruded epoxy repair system that can be used for metal items.

Features

Will not sag, run or drip.
Easy to use - no mess.
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing.
Good adhesive strength.
Can be used to reshape, rebuild and repair a multitude of surfaces and applications.
Good gap filling properties.
Long-lasting, durable solution.
Heat resistant to 120°C continuously or 140°C intermittently.
Rapid Set (less than 10 minutes)
Can be used for fuel resistant repairs

Product Details
How to Use
Handy tips
Clean Up
Videos

Where can this product be used?

Rebuilding engine parts and rusted metal etc
Repairing a hole in a fuel tank
Repair of iron pipes, tools and equipment
Repair stripped threads
Forming of nuts and bolts in place
Attaching fixtures and signs
Fixing radiators
Repairing holes in cars and boats
Patching ducts and tanks
Making prototypes
Repair of down pipes and gutters
Anchoring of bolts
Repairing your metal outdoor furniture

What materials is this product suitable for?

Steel
Wide range of ferrous metal and aluminium items
Most plastics* (pre-test required)
Glass

Please contact your store to confirm avaliability, as some stores may have a limited range.

Size	110g Tube
Colours	Dark Grey
Technology	Epoxy
Use	Interior
	Exterior

Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to uniform colour. If mixing is difficult, warm to room temperature. Apply with pressure to surface to be repaired (within 2 minutes of mixing) and mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
After 5-10 minutes Knead It Steel will harden and begin to form a strong bond. After 60 minutes Knead It Steel may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water after use.

Limitations:

Not recommended for plastic fuel tanks.
Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber.
Not tested for drinking water contact to AS/NZ 4020:2005.

Ensure the putty and hardener are mixed properly. Knead It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour, and feel a mild heat radiating from thre Knead It.
To help determine when your Knead It has set, keep a small piece off to check when it is hard, it indicates your job is done.
Store in a cool place for maximum shelf life
Use Knead It Multi Purpose for applications in contact with drinking water.
Use Knead It Aqua for applications in wet/submerged areas.
Set time increases at temperatures below 20°C

Remove excess and hand rub with water or a damp cloth
before hardening begins.

Related Products

Selleys Knead It Aqua

Selleys Knead It Aqua is a versatile hand kneadable, fast setting co-extruded epoxy repair system that can be used for repairing a multitude of things. It is especially suitable for application to damp, wet or underwater substrates.

Selleys Knead It Multipurpose

Selleys Knead It Multipurpose is a versatile, hand kneadable fast setting epoxy putty that is ideal for repairing, rebuilding, reshaping or restoring almost anything. It can be drilled, filed, machined, screwed, sawn, sanded, stained and painted.