Selleys 655FC is a premium 100% clear flexible adhesive and sealant powered by Selleys advanced hybrid technology. Offering a very broad primerless adhesion property with crystal clear finish, 655FC is able to withstand both indoor and outdoor conditions. Once cured, it provides superior strength with instant grab. It can also be applied to wet or damp surfaces with excellent adhesion. It is for sealing, bonding and filling. Suitable for wet or dry surfaces. For interior/exterior applications
It can be used as a joint sealant and multipurpose adhesive.
Joint Sealant: Can be used for vertical and horizontal joints on most indoor and outdoor surfaces.
Multipurpose adhesive: Suitable for bonding most building materials including timber, brick, concrete, tiles, metals and most plastics.
What materials is this product suitable for?
Most other surfaces
Advanced Hybrid Technology
Ensure all surfaces are clean and dry, free of wax grease, dust and any other foreign materials. Metal substrates should be degreased first.
Cut nozzle at a sharp angle slightly wider than the desired bead or join with. If being installed as a joint sealant, always use a suitable backing rod to ensure the correct depth is achieved.
Extrude sealant with a gun and tool with a round spatula within 10 minutes to spread the sealant against the joint surfaces.
Uncured sealant can be removed with mineral turps.
*Wet Surfaces: Can be applied to clean, wet non-porous surfaces e.g. metals, glass, glazed tiles – not wet porous surfaces e.g. concrete, timber. Remove as much water as possible, preferably with acetone. Keep nozzle close to surface so sealant contacts surface immediately. Flatten immediately into joints. Adhesion improves on drying.
Skins immediately, maximum toughness achieved over several days.
Paintable immediately with water-based paints. For oil-based paints undercoat first with a water-based paint.
Store in cool dry conditions, below 30°C
Uncured product may be removed with mineral turps.