Selleys Pro Trade Construction Adhesive Multipurpose

Selleys Pro Trade Construction Adhesive Multipurpose is a high strength, multipurpose adhesive that forms a strong and lasting bond on most building substrates. It's flexible enough to respond to normal shrinkage and thermal movement between building components without losing bond strength. It can be used as the sole means of bonding (as a contact adhesive) or as a component in a dual bonding situation, i.e. in conjunction with mechanical fasteners, or where nails or screws are used to support the weight until full cure is completed. It also exceeds requirements specified by Australian Standard AS 2329 (1999) “MASTIC ADHESIVE FOR FIXING WALLBOARDS”. (Including wet and poorly seasoned timber)

Features

High Strength
Fast cure, but does not skin too quickly
Water resistant
Easily extrudable at low temperatures
Does not drip, sag or string between panels
Bridges gap up to 9mm hence can be used on rough and ill-fitting construction materials.
Dried adhesive is paintable

Overview
Usage
Colours
Videos

Selleys Pro Trade Construction Adhesive Multipurpose is a high strength, multipurpose adhesive that forms a strong and lasting bond on most building substrates.

Technology	Solvent based synthetic rubber
Initial Bonding Strength	> 500 kPa after 24 hours
Bond Strength in Tensile Shear	>1 Mpa
Initial Cure	24 hours
Colour	Beige

Suitable for the following applications:

Sheet flooring to joists
Metal or aluminium door strips to floors or walls
Timber or fibre cement sheeting to cement block or brick walls
Masonite / hardboard to timber or floor boards
Wallboard or panelling to wood or metal frames
Cork tiles to timber, fibre cement or plaster
Timber flooring to yellow tongue in conjunction with mechanical fixings to avoid later squeaking