Selleys Storm Sealant
Selleys Storm Sealant delivers a waterproof seal on any material*, wet or dry, indoor or outdoor. It can even be applied in the rain to stop leaks in an instant.
Selleys 635 is a premium 100% clear, multipurpose elastic joint Sealant powered by Selleys advanced hybrid technology, suitable for a variety of sealing applications. Offering excellent resistance against UV and weathering. 635 can withstand both indoor and outdoor conditions. It is non-slump, non-sagging in joints up to 20mm in width. It offers broad and primerless adhesion with a crystal-clear finish. It can be applied on damp or wet surfaces. It is also a low VOC*, low odour product, free from solvents and isocyanates. Once cured it forms a strong, elastic waterproof** seal that is paintable with water-based paints.
*Meets GBCA limits for general purpose and architectural sealants.
** Not for permanent water immersion
Features
- Long lasting flexibility
- Adhesion to wet surfaces**
- UV & weather resistant
- 100% Clear
- Paintable
Where can this product be used?
- Can be used for vertical and horizontal joints on most indoor and outdoor surfaces
What materials is this product suitable for?
- Concrete
- Timber
- Metals
- Cement sheeting
- Brick
- Plaster
- Ceramic tiles
- Glass
- and most other surfaces#
#Not suitable on Polyethylene, Polypropylene or PTFE.
| Size |
300ml |
| Colours |
Clear |
| Technology |
Advanced Hybrid Technology |
| Use |
Interior Exterior |
- Ensure all surfaces are clean and dry, free of wax, grease, dust andany other foreign materials. Metal substrates should be degreased first.
- Cut nozzle at a sharp angle slightly wider than the desired bead or joint width. If being installed as a joint sealant, always use a suitable backing rod to ensure the correct
depth is achieved. - Extrude sealant with a gun and tool with a round spatula within10 minutes to spread the sealant against the joint surfaces.
- Uncured sealant can be removed with mineral turps.
- Can be applied to clean, wet non-porous surfaces e.g. metals, glass, glazed tiles – not wet porous surfaces e.g. concrete, timber. Remove as much water as possible, preferably with acetone. Keep nozzle close to surface so sealant contacts surface immediately. Flatten immediately into joints.
- Adhesion improves on drying.
- Skins in 20 minutes, maximum toughness achieved over several days.
- Paintable with water-based paints after product skins. Pre-test paint over a small section of sealant before completing job. Some paints may require sealant to be lightly sanded before painting.
- Sandable when fully cured.
- Store in cool dry conditions, below 30°C
- Uncured product may be removed with mineral turps.
Selleys 650FC Fast Cure Adhesive Sealant
Selleys 650FC is a premium fast cure multipurpose flexible adhesive sealant powered by advanced hybrid technology, making it a highly durable and isocyanate & solvent free product for both interior and exterior bonding & sealing applications.
Selleys 655FC Fast Cure Adhesive Sealant
Selleys 655FC is a premium 100% clear flexible adhesive and sealant powered by Selleys advanced hybrid technology. Offering a very broad primerless adhesion property with crystal clear finish, 655FC is able to withstand both indoor and outdoor conditions. Once cured, it provides superior strength with instant grab. It can also be applied to wet or damp surfaces with excellent adhesion. It is for sealing, bonding and filling. Suitable for wet or dry surfaces. For interior/exterior applications
How to Guides
4 Top tips If A Storm Is Heading Your Way
Weather events can often take us by surprise and wreak havoc on our homes. Here’s some top tips to help you prepare you and your house for changeable weather.
How To Use A Caulking Gun
Here are 4 steps to have you caulking like a pro!
Share
Share this product with your friends