Selleys Glass Silicone
Selleys Glass Silicone is an acetic acid curing 100% silicone, which been specially formulated for glazing and aquarium construction.
Selleys No Mould Silicone sealant is specially designed to create a long lasting waterproof seal in areas where mould resistance is necessary
Features
- Superior formulation+ that stops mould growth*
- Fast skinning formulation which means you can use your shower in 1 hour#
- Provides a durable waterproof seal
- Resists lifting
Where can this product be used?
- Suitable for use in humid and damp environments such as
- Kitchens
- Bathrooms
- Laundries
- Showers
- Basins
- tiles
- Worktops
- Baths & spas
- Plumbing fixtures
What materials is this product suitable for?
- Ceramic
- Glazed & porcelain fixtures
- Aluminium
- Plastic laminates
- Some rubbers
- Glass
- Stainless Steel
Please contact your store to confirm avaliability, as some stores may have a limited range.
| Size |
290ml Cartridge 100ml Tube |
| Colours |
White |
|
Translucent |
|
|
Light Grey |
|
|
Dark Grey |
|
| Technology |
Acetic cure silicone |
| Use |
Interior |
- Before applying your new sealant we recommend spraying Selleys Rapid Mould Killer into the gap to kill any residual mould
- Thoroughly clean surface where sealant will be applied with turps and dry completely
- Cut nozzle at 45°angle, cut cartridge tip and fit nozzle
- Place in a caulking gun, apply with steady pressure, ensuring sealant is pushed into the joint
- Tool with a spatula dipped in detergent water within 5-10 minutes of application
- Clean up with turps before product skins
Limitations:
- +Compared to Selleys Wet Area
- #Sealant will be waterproof and shower ready in 1 hour after application in showers. The semi-cured sealant must not be touched until fully cured (at least 48 hours)
- *To maintain your sealant properties, ensure you regularly clean off any soap scum and dirt as these encourage mould growth
Not suitable for aquariums, food or drinking water contact, permanent immersion in water, or metals other than aluminium and stainless steel. Not suitable for PE, PP, PTFE and some rubbers. Pre-test on other surfaces for compatibility
- For neater joints, mask sides before applying sealant and remove tape before sealant skins
- Not paintable. Complete painting 7 days before applying sealant
Store in a dry place below 30°C. Use within 6 months of opening.
How to Guides
How To Create A Chopping Board
Keep on trend and learn how to create a stunning chopping board for serving which will be the envy of your friends at your next dinner party.
How To Fix A Splashback To A Wall
Sticking a splash back in a kitchen is a great way to improve the aesthetics of the kitchen. Selleys make the job easier with this step by step guide.
How To Makeover Your Kitchen In An Afternoon
The kitchen is the heart of every family home, but over time – cooking spills, kids, clutter can leave it looking a little tired. Here are some simple steps to giving it a refresh
How To Seal A Kitchen Splashback
Sealing your splashback is the final step to installing a splashback and perhaps the most important! It's super easy to do with Selleys silicone sealant.
Share
Share this product with your friends