Selleys FlameFlex
Selleys FlameFlex High Performance Sealant can be used for construction joints & gaps where a fire rated seal is specified*.
Selleys ProSeries Flexiseal multipurpose sealant is a non slumping polyurethane construction sealant with high movement capability, low modulus and excellent adhesive properties. Weatherproof, suitable for indoor and outdoor applications, paintable after it has cured.*
Features
- Highly flexible
- Excellent adhesion
- Non-slumping
- Ideal for expansion joints
- Suitable for +/-25% joint movement
- Complies with ISO 11600/F/25LM
- *Suitable for most water-based paints. For oil-based paints undercoat with water-based primer. Testing recommended if paint is applied more than 5 days after the sealant application.
Where can this product be used?
- Sealing expansion and construction joints in vertical and horizontal applications
What materials is this product suitable for?
- Concrete
- Masonry
- Brick
- Ceramic tile
- Metals
- Softwood
- Hardwood
- Some plastics (will not adhere to polyethylene or polypropylene—test other plastics first).
Please contact your store to confirm avaliability, as some stores may have a limited range.
| Size |
310ml cartridge |
|
600ml sausage (Grey only) |
|
| Colours |
Grey |
|
Black |
|
|
White |
|
| Technology |
Polyurethane |
| Use |
Interior |
|
Exterior |
- Surface must be clean, dry and free from oil, grease, release agents, dust and loose material.
- Install backing rod to correct depth apply masking tape as required.
- Cut the end of the sausage or cartridge, fit with nozzle and insert into a Selleys caulking gun.
- Extrude sealant into the joint such that it is in full contact with the sides of the joint. Avoid overlapping of sealant to eliminate entrapment of air.
- Smooth sealant with spatula forcing the sealant into the joint for better contact with the sides.
Painting with water based paints is possible after curing. If solvent based paints are used; prime first with water based primer.
Limitations:
- *Suitable for most water-based paints. For oil-based paints undercoat with water-based primer. Testing recommended if paint is applied more than 5 days after the sealant application.
- Apply between 5°C and 30°C.
- For easier gunning store product at approximately 20°C prior to use in cold weather.
- Good adhesion properties to building materials indicated without priming. Pre-test to ensure adhesion is suitable.
- Uncured material can be cleaned up with mineral turps.
- Cured sealant can be cut with a sharp blade
Selleys Glass Silicone
Selleys Glass Silicone is an acetic acid curing 100% silicone, which been specially formulated for glazing and aquarium construction.
How to Guides
How To Create A Chopping Board
Keep on trend and learn how to create a stunning chopping board for serving which will be the envy of your friends at your next dinner party.
How To Fix A Splashback To A Wall
Sticking a splash back in a kitchen is a great way to improve the aesthetics of the kitchen. Selleys make the job easier with this step by step guide.
How To Makeover Your Kitchen In An Afternoon
The kitchen is the heart of every family home, but over time – cooking spills, kids, clutter can leave it looking a little tired. Here are some simple steps to giving it a refresh
How To Seal A Kitchen Splashback
Sealing your splashback is the final step to installing a splashback and perhaps the most important! It's super easy to do with Selleys silicone sealant.
Share
Share this product with your friends