Selleys Ezi Press Wet Area Silicone
Selleys Wet Area Ezi Press is ready to use – simply press the lever to apply – no caulking gun required.
Selleys ProSeries Acryseal is an acrylic fire and acoustic rated sealant for perimeter and penetration seals in fire rated construction.
Features
- Fire rated for up to 4 hours
- Will not degrade acoustic walls that meet the BCA requirements
- Excellent adhesion to most building materials
- Paintable
- Low odour
- Low VOC
- Water clean up
Where can this product be used?
- Non-trafficable control joints in concrete, masonry and brick fire rated construction
- Penetrations and perimeter sealing in plasterboard
- Acoustic sealing
What materials is this product suitable for?
- Concrete
- Masonry
- Fire rated brick
- Plasterboard
Please contact your store to confirm avaliability, as some stores may have a limited range.
| Size |
600mL Sausage |
| Colours |
Off white |
| Technology |
Water Based |
| Use |
Interior |
The following should only be used as a guide and the installer should apply all Australian Standards, BCA/NZBC requirements, and best practices when using Proseries Acryseal.
- Substrates must be clean, dry and free from oil, grease, release agents, dust and loose material.
- Insert sausage into sausage gun and snip metal clip from one end.
- Attach nozzle and extrude sealant smoothly into joint.
- For fire rating, joint width should be between 10mm and 40mm. Minimum joint depth should be 10mm or half the width for joints wider than 20mm.
- Install open cell polyurethane backing rod in joint to control sealant depth.
- Allow the sealant to form a thick skin before painting with a flexible paint. To avoid paint cracking, the sealant should be allowed to fully cure before painting with flat and/or ceiling paint.
Limitations:
- Not recommended for continuous submersion or below water line use.
- For exterior applications protect from rain until sealant has developed a thick skin.
- AS1530.5-2005 Fire test in vertical concrete and plasterboard – control joints, penetrations and perimeter seals
- ISO9046 Joint movement capability
- Spills and tools can be cleaned up with water before product cures.
Selleys FlameFlex
Selleys FlameFlex High Performance Sealant can be used for construction joints & gaps where a fire rated seal is specified*.
Selleys Glass Silicone
Selleys Glass Silicone is an acetic acid curing 100% silicone, which been specially formulated for glazing and aquarium construction.
How to Guides
How To Create A Chopping Board
Keep on trend and learn how to create a stunning chopping board for serving which will be the envy of your friends at your next dinner party.
How To Fix A Splashback To A Wall
Sticking a splash back in a kitchen is a great way to improve the aesthetics of the kitchen. Selleys make the job easier with this step by step guide.
How To Makeover Your Kitchen In An Afternoon
The kitchen is the heart of every family home, but over time – cooking spills, kids, clutter can leave it looking a little tired. Here are some simple steps to giving it a refresh
How To Seal A Kitchen Splashback
Sealing your splashback is the final step to installing a splashback and perhaps the most important! It's super easy to do with Selleys silicone sealant.
Share
Share this product with your friends