Selleys Ezi Press Wet Area Silicone
Selleys Wet Area Ezi Press is ready to use – simply press the lever to apply – no caulking gun required.
Selleys SolarFlex provides protection from ultraviolet (UV) radiation and other harsh weather elements. Harsh Australian and New Zealand conditions make the choice of an effective solar/weather protection solution critical.
Features
- Superior weather protection
- Long lasting flexibility
- No primer required before painting
- Water tight seal with a 10 year guarantee*
- Adhesion to wet or damp surfaces
- Non-bubbling
- Better curing and extrudability (>5°C) with no slump
- Paintable with water-based paints after product skins in 60 to 90 minutes
- Low VOC**
Where can this product be used?
- Sky lights
- Walls
- Patios
- Floors
- Fencing
- Windows
What materials is this product suitable for?
- Concrete
- Timber
- Metals
- Cement sheeting
- Brick
- Plasterboard
- Ceramic tiles
- Fibreglass
- Most plastics#
- #Not suitable on polyethylene, polypropylene or Teflon.
Please contact your store to confirm avaliability, as some stores may have a limited range.
| Size |
300g Cartridge 445g Cartridge 600mL Sausage |
| Colours |
300g – Clear 445g - Black, Grey, Sandstone and White 600mL – Grey and White |
| Technology |
Sil-X® |
| Use |
Interior |
|
Exterior |
- Ensure substrates are clean and free of oil, grease or loose particles.
- Cut seal and nozzle and fit to cartridge, then place in caulking gun.
- Hold caulking gun at 45° angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
- For neat joints, use masking tape on both sides of the joint and remove before skinning.
- Tool with a soapy solution before skinning occurs. For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth. See technical data sheet for more information.
Limitations:
- #Not suitable on polyethylene, polypropylene or Teflon.
- Cure excess product before disposal.
- Not for permanent water immersion or below water-line use. For water immersion please use Selleys Marine Flex
- In dry conditions, surfaces can be misted with water to speed up cure.
Warranty Information
*Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.
Additional Information
**Meets GBCA limits for general purpose and architectural sealants.
- Uncured product can be removed with mineral turps.
- Cured product can be removed with Selleys Silicone Remover or by mechanical action.
Selleys FlameFlex
Selleys FlameFlex High Performance Sealant can be used for construction joints & gaps where a fire rated seal is specified*.
Selleys Glass Silicone
Selleys Glass Silicone is an acetic acid curing 100% silicone, which been specially formulated for glazing and aquarium construction.
How to Guides
How To Create A Chopping Board
Keep on trend and learn how to create a stunning chopping board for serving which will be the envy of your friends at your next dinner party.
How To Fix A Splashback To A Wall
Sticking a splash back in a kitchen is a great way to improve the aesthetics of the kitchen. Selleys make the job easier with this step by step guide.
How To Makeover Your Kitchen In An Afternoon
The kitchen is the heart of every family home, but over time – cooking spills, kids, clutter can leave it looking a little tired. Here are some simple steps to giving it a refresh
How To Seal A Kitchen Splashback
Sealing your splashback is the final step to installing a splashback and perhaps the most important! It's super easy to do with Selleys silicone sealant.
Share
Share this product with your friends